Can anyone advise on how to get the rf frequency that it stops on, or how to set the display to show it? trying to keep track of which alpha tags are associated with a tag is a mind blower.
Two ways:
1. Program the frequency with the alpha tag.
2. There are different display modes that are toggled via FUNC-6 while
in HOLD mode. At least one of them will show the frequency.
To toggle between Display Modes 1, 2 or 3 Hold on any channel, press the big round silver knob, then 6(for DISP). Press Hold to resume.
From Mark's Easier to Read online manual:
http://marksscanners.com/996xt/996xt.shtml#freq or ID display
No comments:
Post a Comment
Thanks for your comments, Comments may take a day to show up
A discussion group about this subject.
Digital Ham Radio / Amateur Radio
DigitalHamRADIO@groups.io
https://groups.io/g/DigitalHamRADIO
****** share this with others *******
Radio Scanners - Uniden / Whistler
https://groups.io/g/Scanners
The purpose of this group is for discussing scanner and scanner frequencies, such as police, fire, rail, and aviation! Mods, Modification and hacks.
https://groups.io/g/Scanners
Note: only a member of this blog may post a comment.